一种有效折扣证据源的冲突证据合成方法

为解决证据组合规则中一票否决和弱决策证据在低冲突情况下出现的反直观推理的现象，提出一种有效折扣证据源的冲突证据合成方法。首先根据证据的信任函数和似然函数求得证据间的相似度，然后求出证据之间的支持程度，并确定折扣因子，最后采用Dempster组合规则合成利用折扣因子修正后的证据源。数值算例分析结果表明，改进后的证据组合方法可以有效地处理证据冲突。     

镀铝板用耐高温型无铬钝化结合机理及性能

传统的有机类无铬钝化产品在400 ℃的高温条件下黄变较重,在保持优异的耐高温前提下,同时具有优异的耐蚀性和加工性能,设计了镀铝板使用的无机类加少量有机类的无铬钝化产品。利用电化学工作站、X射线光电子能谱、X射线荧光谱、红外光谱等方法,对该无铬钝化药剂在热镀铝板表面的成膜机理进行了研究,并结合成膜动力学分析,完成了皮膜与铝硅镀层的界面结合机理分析。对膜重、固化温度对镀铝板工艺性能影响进行研究,得出综合性能优异的膜重控制范围为0.8～1.2 g/m2,对应的PMT温度大于80 ℃。所生产的无铬钝化热镀铝板产品耐高温、耐腐蚀和冲压性能优异,400 ℃烘烤2 h后表面色差ΔE＜3,72 h中性盐雾试验未出现锈蚀。     

Natural Silk Film for Magnesium Protection: Hydrophobic/Hydrophilic Interaction and Self‐Healing Effect

Biodegradable implants are required in order to provide successful treatment of injuries. Temporary magnesium‐based implants with particular properties are needed in cases when it is desirable not only to maintain vital activity, but also to initiate the self‐healing process of damaged bones or tissues as well. Unfortunately, the use of magnesium alloys is limited due to the fast biodegradability of the applied material. The aim of this research is to improve the corrosion resistance of magnesium alloys by sonochemical treatment in silk solution followed by additional layer‐by‐layer deposition of natural silk on the magnesium surface. The sonication process is carried out at a frequency of 20 kHz during 5–10 min, while the duration of the silk layer deposition is 15 min. The corrosion behavior of magnesium substrates modified by natural silk layer‐by‐layer assembly is studied. Magnesium substrates sonochemically treated in silk solution demonstrate three times better corrosion resistance compared to control samples sonochemically treated in water. Additional deposition of a silk layer enhances obtained corrosion resistance by 18 times, resulting in a 54‐fold increase overall.     

Factors Affecting Web Disclosure Adoption in the Nonprofit Sector

ABSTRACT

Nonprofit organizations (NPOs) are strategically using their own personal website to present themselves to the public and share information. Despite the potential benefits of enhanced public confidence and trust, reduced operating costs, improved donor decision making, and increased donations, many nonprofit organizations have resisted the adoption of web disclosure. Informed by the literature on information systems (IS) adoption and technological innovation, this study examines the primary factors that influence the adoption and resistance of web disclosure. Our sample consisted of 176 survey responses from an initial group of 3,323 U.S. NPOs. The statistical results indicate that attitude toward disclosure, compatibility of disclosure with current practices, and financial readiness have a positive influence on web disclosure adoption. The findings have implications for research and practice.     

In‐plane shear damage behaviours of 2D needled C/SiC composites

Understanding the in‐plane shear behaviour of composites is essential to establish the design basis for practical applications. This study aims to investigate the shear damage behaviours of 2D needled C/SiC composites by various characterization techniques. The effect of layer arrangement on shear modulus and strength was discussed via shear stress‐strain responses. The shear strain field evolution and uniformity variation were studied by digital image correlation. It shows that the uniformity of shear strain field changes with the shear load, and the shear strain field evolution consist of 5 stages. The electrical resistivity measurement results indicate that structural deformation and damage evolution caused the electrical resistivity change. Furthermore, the damage evolution has a double effect on the electrical resistivity variation. The acoustic emission monitoring shows that the shear damage evolution is a 3‐stage nonlinear process before failure. The shear damages were categorized via acoustic characteristics. Besides, the postfailure behaviours were also discussed in this study.     

利用地震品质因子Q比例的分布特征预测南川页岩气藏保存条件

根据地震数据、地质资料和地震属性，开展了南川地区五峰组-龙马溪组下部页岩的地震品质因子Q平面上分布与页岩气保存条件评价研究。针对南川地区页岩气开发中的断裂破碎带，提出了一种获取稳定品质因子Q比例及界限的工作流程和相应的迭代算法。研究表明，地震品质因子Q比例的分布可以快速、直观识别出断裂破碎带的内幕特征与不同类型页岩分布区。其中，断裂破碎带页岩区的品质因子Q比例总体上偏小，大多低于0.2，局部超过0.5，平面上分布杂乱、碎斑状；页岩呈北东向展布的条带，被断裂所撕裂、破碎，保存条件较差。稳定分布的页岩区的品质因子Q比例是较高的，超过0.7，平面变化稳定，没有突变现象，保存条件好。微裂缝发育的页岩区的品质因子Q比例具有渐变的趋势性，品质因子Q比例的分布从该页岩区的边部0.7向中部有规律地减小至0.1，保存条件最佳。实践证明，高产气井大多位于稳定分布的页岩区或内部微裂隙发育的稳定页岩区，地震品质因子Q比例研究方法对页岩气保存评价与开发井优化部署是一个实用工具。     

二次侧非能动余热排出系统流动不稳定性研究

二次侧非能动余热排出（ASP）系统是压水堆核电厂应对全厂断电事故的重要措施之一。为研究ASP系统的运行特性，设计建造了ASP系统试验装置（ASPTF）。在ASPTF上开展了ASP系统运行稳定性影响试验，并对试验结果进行了理论分析。试验研究与理论分析结果表明：低压低功率下ASP系统中出现流动不稳定性；增加蒸汽管线或回水管线阻力系数可抑制ASP系统出现流动不稳定性；降低加热功率时ASP系统更易出现流动不稳定性；主泵运行状态影响ASP系统的输入功率进而影响系统的流动不稳定性。     

制浆造纸企业配电变压器的选择和节能探讨

本文计算并分析了变压器运行的损耗，从配电变压器的选型、负荷率的选择等方面探讨了其节能降耗措施；并对制浆造纸企业配电变压器选用方法提出了建议。     

电驱液压式大截面导线压接设备自动化研究

现有的压接设备可控性差、操作复杂,导致压接质量因人而异。针对此问题,提出了基于DDVC技术的导线压接设备自动化控制方案,建立了速度控制系统数学模型,应用Simulink进行仿真,分析系统性能。建立了基于DEFORM的耐张线夹压接实验模型,获得了耐张线夹压接的最佳加载速度曲线,并以此作为压接设备速度控制系统的Simulink仿真模型输入,对压接过程进行了仿真分析。结果表明:开环控制时系统存在一定的超调,加入PID控制后可有效抑制超调;所设计的压接设备可很好地跟随最佳压接曲线,跟随误差仅为0. 904 mm·s-1。研究成果对改进压接设备、提高压接质量提供了新的解决方案。